Mesanovic Microphones
Der CDM65 ist ein 3-Wege-Aktivlautsprecher mit DSP, der für kompromisslose Leistung und Konnektivität entwickelt wurde. Er bietet die einzigartige Möglichkeit, verschiedene vordefinierte Abstimmungen hochzuladen, darunter den Cardioid-Modus, der die Richtwirkung des Lautsprechers bis hinunter auf 150 Hz steuert. Zudem kann der CDM65 kabellos Audio von jedem WiSA-Transmitter oder vom Platin Stereo Hub empfangen. Diese Funktionen machen den CDM65 zur idealen Wahl sowohl für das Monitoring im Studio als auch für das HiFi-Hören zu Hause.
A new take on ribbon design The Model 2 is a ribbon microphone that pushes modern design to its limits. The Model 2 is a passive ribbon that is completely handcrafted in Detroit, Michigan. It features a 1.8 micron thick, 2 inch long pure aluminum ribbon. The ribbon motor was designed to have a very short front to back path length as well as custom resonator plates. These features give the Model 2 an incredibly extended high frequency response, while retaining classic ribbon midrange and a rich, low end that reaches flat out to 20 Hz. You can hear the high frequency "air" in this microphone, something not common in ribbons. The Model 2 features our unique in house wound toroidal transformer. This transformer provides extremely low distortion, low noise, incredible high frequency detail, and a 3D like sound. The microphone's slim body (1.25 inches in diameter) allows it to be used with most third party shockmounts and allows for quick and easy set up. The Model 2 sounds great on all sources. Its smooth, flat extended response makes it an excellent choice on vocals, guitar amps, drums, strings, brass, piano, and much more. We recommend using this mic on sources where you would usually not reach for a ribbon, we guarantee you won't be disappointed. Like the Model 1, the Model 2 also delivers an amazingly quick transient response. We offer a lifetime warranty with our microphones because we are certain they are built for years of use. The microphone ships with a plastic carry case, mount clip, and protective pouch. Specifications: Directional Pattern: Bidirectional Frequency Range: 20-20 kHz and beyond Sensitivity: -53.2 dB (2.2 mV/Pa) Noise Floor: <17 dBA Max SPL: 140dB SPL Output Impedance: 250 Ohms Ribbon Element: Material: Pure Aluminum Thickness: 1.8 microns Length: 2 in Width: 0.23 in Dimensions: Height: 7.4 in Diameter: 1.25 in Weight: 340 g
The active version of the Model 2 The Model 2A is an active version of the Model 2 ribbon microphone. The Model 2A utilizes the same design features found in the Model 2 and offers the same unique sonic character. The microphone contains our signature motor structure and custom designed resonator plates to provide the incredibly extended, detailed, and 3D like response found in our Model 2. The Model 2A’s high output is provided by a custom, in house wound, toroidal transformer. This high turn ratio transformer is perfectly matched to the Model 2A’s ribbon to provide optimal performance. The phantom powered electronics work as an impedance buffer and provide no additional gain or coloration to the sound. The result of this ideal impedance matching is 13 dB more output than the Model 2 and extremely low self-noise. With its high output level, the Model 2A will work perfectly with any preamplifier. Whether you are using an entry-level interface or a high end dedicated preamp, the Model 2A will deliver stunning results. The Model 2A excels on quieter sources such as acoustic guitar, vocals, strings, and piano - yet still delivers beautifully on louder sources like guitar amps and drum overheads. The Model 2A also shines on location recordings of choirs and orchestras where low noise and high output is needed. The Model 2A is covered by a lifetime parts warranty and a free re-ribboning for the original owner within two years of purchase. The microphone ships with a plastic carry case, mount clip, and protective pouch. Specifications Directional Pattern: Bidirectional Frequency Range: 20-20kHz and beyond Sensitivity: -40.2 dB (9.8 mV/Pa) Self Noise: 11 dB(A) Max SPL: 140dB SPL Output Impedance: 170 Ohms Ribbon Element: Material: Pure Aluminum Thickness: 1.8 microns Length: 2 in Width: 0.23 in Dimensions: Height: 7.4 in Diameter: 1.25 in Weight: 340g
Model 2 sound in a stereo package The Model 2S is a passive stereo ribbon microphone utilizing the same design features found in the Model 2. The Model 2S uses two matched ribbon motors angled at 90 degrees to each other to create a Blumlein configuration. It uses the same motors and transformers found in our Model 2. The motors feature a very short front to back path length along with our custom designed resonator plates. These features give the Model 2S the same unique sonic character found in our Model 2: an incredibly extended and detailed high end, classic smooth ribbon midrange, an open and transparent low end, and an amazingly quick transient response. A custom designed toroidal transformer provides extremely low distortion, low noise, and 3D like sound. The Model 2S captures stunning stereo recordings with ease. Whether you are using the Model 2S in a Blumlein or M-S stereo configuration, the microphone's uniform polar frequency response and excellent off-axis frequency response will provide you with outstanding phase coherent stereo recordings. Solid phase compatibility between the two channels of the Model 2S also allows the user to combine the two channels into a mono recording without any phase artifacts. The microphones slim body and simple isolation mount make it easier than ever to position. The beauty of the Model 2S is its ability to capture incredible 3D like recordings that will make you feel like you are in the room with the performers. Its beautifully balanced and extended frequency response greatly reduces the need for post equalization. The Model 2S shines on orchestral and choral recordings. It will have you hearing drum overheads and room recordings like never before. The Model 2S will easily become your favorite on string sections, horn sections, piano, acoustic guitar, and so much more. The Model 2S is covered by a lifetime warranty on parts and a free re-ribboning for the original owner within two years of purchase. The microphone ships with a plastic carry case, mount clip, protective pouch, and a 5-pin XLR female to dual 3-pin XLR male breakout cable. Specifications Directional Pattern: Dual Figure 8 Frequency Range: 20-20 kHz and beyond Sensitivity: -53.2 dB (2.2 mV/Pa) Noise Floor: <17 dBA Max SPL: 140dB SPL Output Impedance: 250 Ohms Ribbon Element: Dual ribbons orientated at 90 degrees Material: Pure Aluminum Thickness: 1.8 microns Length: 2 in Width: 0.23 in Dimensions: Height: 11.6 in Diameter: 1.25 in Weight: 540g
Der RTM10 ist ein 3-Wege-Aktivmonitor mit DSP für das Studio. Er bietet einen Frequenzbereich von 28 Hz bis 20 kHz mit äußerst geringer Verzerrung, nahezu unbegrenztem Dynamikumfang, extrem schneller Transientenansprache und beeindruckender Stereobildgebung. Im Zentrum des RTM10 stehen ein reiner Aluminium-Bändchenhochtöner, ein ultra-verzerrungsarmer Aluminium-Mitteltöner und ein Aluminium-Subwoofer mit hohem Hub. In Kombination mit den neuesten NCore-Verstärkern von Hypex und proprietärer DSP-Technologie bietet der RTM10 eine Klangbühne, die in dieser Baugröße ihresgleichen sucht.
Der SC1 ist unser erstes Kleinmembran-Kondensatormikrofon. Es verfügt über ein austauschbares Kapselsystem und wird mit passenden Kapseln für die Richtcharakteristiken Omni und Niere geliefert. Der SC1 ist in einer transformatorlosen Bauweise konzipiert, die niedrige Eigengeräusche, geringe Verzerrungen, extrem schnelle Transientenansprache und einen natürlichen Klangcharakter bietet. Der SC1 wird präzise aus Edelstahl gefertigt und in unserer Produktionsstätte in Detroit hergestellt. Jedes Kapselpaar wird im ISO-zertifizierten schalltoten Raum auf Empfindlichkeit und Frequenzgang abgestimmt. Der SC1 eignet sich hervorragend für Stereoaufnahmen von Schlagzeug, Räumen, Streichern, Orchestern, Klavier und akustischer Gitarre. Dank seiner hohen Schalldruck-Toleranz ist der SC1 auch eine ausgezeichnete Wahl für Snare Drums, Toms und Gitarrenverstärker.