Neumann TLM 170 R mt

Neumann TLM 170 R mt

The Neumann TLM 170 RMT is identical to the TLM 170 except it's finished with a matt-black coating, making the microphone inconspicuous in broadcast applications. The large diaphragm, multi-pattern condenser microphone is intended for vocal and general instrument recording and broadcast applications. The microphone features a very smooth, flat frequency response resulting in transparent sound reproduction without any coloration to the signal on output. The output circuitry features a transformer-less design resulting in quiet output in addition to low self-noise and impressive dynamic range. The TLM 170 RMT features 5 directional polar-patterns. Omni-directional, cardioid, hyper-cardioid, and figure 8 are available for use in any recording application. A 10dB pad switch provides further head room and SPL capability and a high pass filter switch eliminates noise at low end frequencies.

Features:
Matt Black Finish:The TLM 170 RMT features a non-reflective black matt finish, making the microphone less conspicuous in live sound and broadcast applications.
FET Design:FET 100 technology along with a balanced, transformerless output stage result in high gain and low noise audio output.
5 Polar Patterns:Omni-directional, wide angled cardioid, hyper-cardioid and figure eight are all available.
Transparent Output Signal:The TLM 170RMT features a flat frequency response curve, resulting in clean, transparent audio reproduction without signal coloration.

Technical Specifications:
Transducer     Pressure Gradient Condenser
Polar Pattern     Omnidirectional, Wide Angle Cardioid, Cardioid, Hypercardioid, Figure-8
Frequency Response     20 Hz - 20 kHz
Dynamic Range (Typical)     130 dB
Power Requirements     Phantom 48v
Output Impedance     50 Ohms
Output Connectors     3-Pin XLR Type
Pad     Yes, -10 dB Preattenuation
Low Frequency Roll-Off     Yes, Switchable Low Frequency Roll-Off
Dimensions     6.08 x 2.4" (152 x 60mm) LxDdiameter
Weight     22 oz. (625 g)